Descriptions

Babylock Belt Loop Folder for Overlock & Cover-stitch

• Original parts for Babylock models:
• BLCS
• Evolve (BLE8W-2),
• Evolution (BLE8W-2),
• Ovation (BLE8)

• Don't let the name fool you. You'll have plenty of options with this foot, exclusively for the Evolve and Cover-stitch machines.
• Easily create straps, drawstrings, decorative trim, purse handles and of course, belt loops.
• This binder takes all of the work out of bias strips by folding and pressing them for you.

TYPE OF APPLICATION :

MAKING BELT LOOPS FOR GARMENTS OR OTHER PROJECTS .

STITCHES USED :

• TRIPLE COVER STITCH :C1 - C2-C3
• WIDE COVER STITCH: C1- C3
• SEWING SPEED : MODERATE TO SLOW

LIGHT WEIGHT WOKVEN FABRICS CUT ON THE BIAS INSTRUCTION:

• STITCH LENGTH : 3-4
• CUTTING BLADE : DISENGAGED " LOCKED "
• UPPER LOOPER: DOWN
• SEWING TABLE : ON

CUT BIAS FABRIC STRIPS :

• 3/4 INCH FOLDER - CUT TO 7/8 INCH WIDE (22MM)
• 1-1/2 INCH FOLDER - CUT TO 1-5/8 INCH WIDE

NOTE : THE STRIPS MUST BE CUT THIS WIDTH EVEN THOUGH IT IS WIDER THAN THE ATTACHMENT MEASUREMENTS.

1. Feed bias strip, with right side facing up, into the attachment .

2. Pull bias through and up to the needle and under the presser foot .

3. Turn the hand wheel 3-4 times to secure the stitch in the fabric.

4. Align the attachment with the needle position to ensure the folded fabric is caught in the stitching . Make secure the stitch is centred in the belt looping.

5. Be sure to allow 3 inch of extra bias strip at the beginning and ending of project . The extra will be trimmed away when finishing the project .